Brother International HL-7050N Users Manual - English - Page 122
List of factory settings, CONTROL PANEL 3 - 38 - network password
UPC - 012502603375
View all Brother International HL-7050N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
List of factory settings The following table shows the factory settings. ■ The emulation mode affects the setting. Effective modes are shown in brackets in the following table. ■ The following settings cannot be restored to the factory settings with the reset menu in the factory settings mode interface mode, HRC setting, page protection, scalable font, lock panel, page counter and local language for display messages. ■ The copy setting is always restored to the factory setting when the printer is turned off and on again. ■ It is not possible to reset the network settings using the control panel. If you want to reset the print server to its factory settings (resetting all information such as the password and IP address information), hold down the Network Test button on the Network board (NC-4100h) for more than 5 seconds. Display Shows PAPER QUALITY SETUP Submenu SOURCE PRIORITY MP FIRST MP SIZE MANUAL FEED DUPLEX OUTPUT RESOLUTION HRC TONER SAVE DENSITY LANGUAGE PANEL CONTROL POWER SAVE TIME Factory setting =AUTO =MP>T1>T2>T3>T4 =OFF =ANY/A4/LETTER =OFF =OFF =STANDARD =600 =MEDIUM =OFF 0 =ENGLISH LOWER LCD=NONE LCD DENSITY=1 AUTO ONLINE=ON BUTTON REPEAT=0.1 SEC MESSAGE SCROLL=LEVEL 1 =30MIN CONTROL PANEL 3 - 38