Brother International HL-7050N Users Manual - English - Page 245

Bar code human readable line ON or OFF n = 'r0' or 'R0 n = 'r1' or 'R1 Human readable line OFF Human readable line ON Preset: Human readable line ON (1) 'T5' or 't5' (2) 'T6' or 't6' (3) 'T130' or 't130' (4) 'T131' or 't131' Preset: Human readable line OFF All others This parameter shows whether or not the printer prints the human readable line below the bar code. Human readable characters are always printed with OCR-B font of 10 pitch and all the current character style enhancements are masked. The factory setting is determined by the bar code mode selected by 't' or 'T'. Quiet zone n = 'onnn' or 'Onnn' (nnn = 0 ~ 32767) Quiet zone is the space on both sides of the bar codes. Its width can be shown using the units that are set by the 'u' of 'U' parameter. (For the description of 'u' or 'U' parameter, see the next section.) The factory setting of the quiet-zone width is 1 inch. Bar code, expanded character unit, line block drawing and box drawing n = 'u0' or 'U0 n = 'u1' or 'U1 n = 'u2' or 'U2 n = 'u3' or 'U3 n = 'u4' or 'U4 n = 'u5' or 'U5 n = 'u6' or 'U6 n = 'u7' or 'U7 mm (preset) 1/10 1/100 1/12 1/120 1/10 mm 1/300 1/720 This parameter shows the measurement units of X-axis offset, Y-axis offset, and bar code height. A - 46