Brother International HL-7050N Users Manual - English - Page 163
Cleaning the inside of the printer, 14 ROUTINE MAINTENANCE - fuser
UPC - 012502603375
View all Brother International HL-7050N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
Cleaning the inside of the printer When you clean the inside of the printer, pay attention to the following: ■ If your clothes are smeared with toner, wipe off the toner with a dry cloth and immediately wash the clothes in cold water to avoid stains. ■ Never touch the hot fuser. ■ Be careful not to inhale the toner. Fuser is HOT! Figure 5-19 Clean the inside of the printer as follows: 1 Turn off the printer power switch, and then unplug the printer power cord. 2 Open the top cover. 3 Take out the drum unit assembly. 5 - 14 ROUTINE MAINTENANCE
5 - 14 ROUTINE MAINTENANCE
Cleaning the inside of the printer
Clean the inside of the printer as follows:
1
Turn off the printer power switch, and then unplug the printer
power cord.
2
Open the top cover.
3
Take out the drum unit assembly.
When you clean the inside of the printer, pay attention to the
following:
■
If your clothes are smeared with toner, wipe off the toner
with a dry cloth and immediately wash the clothes in cold
water to avoid stains.
■
Never touch the hot fuser.
■
Be careful not to inhale the toner.
Figure 5-19
Fuser is HOT!