Brother International HL-7050N Users Manual - English - Page 116
Interface, Control Panel 3 - 32
UPC - 012502603375
View all Brother International HL-7050N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
INTERFACE Display Shows SELECT AUTO IF TIME INPUT BUFFER PARALLEL RS-232C Description =AUTO/PARALLEL/RS-232C/USB/NETWORK = 1:99 (sec) You need to set the time-out period for the auto interface selection. = Level1:15 RESTART PRINTER? Increase or decrease the input buffer capacity. When using the parallel interface Sub-setting Menu Description HIGH SPEED =ON/OFF BI-DIR Turns high-speed parallel communications on or off. =ON/OFF Turns bi-directional parallel communications on or off. When using the serial interface Sub-setting Menu Description FAX MODE =OFF/ON RESTART PRINTER? BAUDRATE *1 Data transfer speed can be set to 150/300/600/1200/2400/4800/9600/ 19200/38400/57600/115200 baud. CODETYPE *1 =8 BITS/7 BITS PARITY *1 The data length can be set to 7 or 8 bits. =NONE/ODD/EVEN STOP BIT *1 The data error check can be set to NONE, ODD or EVEN. =1 BITS/2 BITS XON/XOFF *1 The data separator can be set to 1 or 2 stop bits. =ON/OFF Handshake protocol can be set to on or off. CONTROL PANEL 3 - 32