Brother International MFC 295CN Users Manual - English - Page 122

Error Message Clean Unable 46 (Init Unable 46) (Print Unable 46) Close Ink Cover Comm.Error Cover is Open Data Remaining Disconnected Cause Action The ink absorber box or flushing box is full. These components are periodic maintenance items that may require replacement after a period of time to ensure optimum performance from your Brother machine. The need to replace these items and the time period before replacement is dependent on the number of purges and flushes required to clean the ink system. These boxes acquire amounts of ink during the different purging and flushing operations. The number of times a machine purges and flushes for cleaning varies depending on different situations. For example, frequently powering the machine on and off will cause numerous cleaning cycles since the machine automatically cleans upon power up. The use of generic inks may cause frequent cleanings because generic inks could cause poor print quality which is resolved by cleaning. The more cleaning the machine requires the faster these boxes will fill up. The ink absorber box or flushing box will need to be replaced. Contact Brother Customer Service or a Brother Authorized Service Center to have your machine serviced. (See Brother numbers on page i.) Other reasons for cleaning are: 1 Machine automatically cleans after clearing a printer jam. 2 Machine automatically cleans after sitting idle for more than 45 days (infrequent use). Note Repairs resulting from the use of non-genuine supplies may not be covered under the stated product warranty. The ink cartridge cover is not completely closed. Poor telephone line quality caused a communication error. The scanner cover is not closed completely. Print data is left in the machine's memory. The other person or other person's fax machine stopped the call. Firmly close the ink cartridge cover until it clicks. Send the fax again or connect the machine to another telephone line. If the problem continues, call the telephone company and ask them to check your telephone line. Lift the scanner cover and then close it again. Press Stop/Exit. The machine will cancel the job and clear it from the memory. Try to print again. Try to send or receive again. 108