Brother International MFC 295CN Users Manual - English - Page 43
Setting the scanner glass size for faxing, Color fax transmission, Canceling a fax in progress - will not print black
UPC - 012502622772
View all Brother International MFC 295CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
f Place the next page on the scanner glass. Press OK. The machine starts scanning the page. (Repeat steps e and f for each additional page.) Setting the scanner glass size for faxing 5 When documents are A4 size, you need to set the scan size to A4. If you do not, the bottom portion of the faxes will be missing. a Make sure you are in Fax mode . b Press Menu, 2, 2, 0. c Press a or b to choose A4. Press OK. d Press Stop/Exit. Color fax transmission 5 Your machine can send a color fax to machines that support this feature. Color faxes cannot be stored in the machine's memory. When you send a color fax, the machine will send it in real time (even if Real Time TX is set to Off). Canceling a fax in progress 5 If you want to cancel a fax while the machine is scanning, dialing or sending, press Stop/Exit. Sending a Fax Broadcasting (Black & White only) 5 Broadcasting is when the same fax message is automatically sent to more than one fax number. You can include Groups, Speed Dial numbers and up to 50 manually dialed numbers in the same broadcast. After the broadcast is finished, a Broadcast Report will be printed. a Make sure you are in Fax mode b Load your document. . 5 c Enter a number. Press OK. You can use either a Speed Dial, a Group or a manually entered number using the dial pad. d Repeat step c until you have entered all the fax numbers to be included in the broadcast. e Press Black Start. Note • If you did not use up any of the numbers for Groups, you can broadcast faxes to as many as 90 different numbers. • The machine's available memory will vary depending on the types of jobs in the memory and the number of locations used for broadcasting. If you broadcast to the maximum numbers available, you will not be able to use dual access. • If the Out of Memory message appears, press Stop/Exit to stop the job. If more than one page has been scanned, press Black Start to send the portion that is in the machine's memory. 29