Brother International MFC-L8850CDW Basic Users Guide - Page 129
Replace Laser, Replace PF Kit MP, Replace WT Box, Scan Unable, Self-Diagnostic
View all Brother International MFC-L8850CDW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
Troubleshooting Error Message Cause Action Replace Laser It is time to replace the laser unit. Contact Brother Customer Service or a Brother Authorized Service Center to replace the laser unit. To replace the laser unit contact Brother Customer Service at: 1-877-BROTHER (1-877-276-8437) (in USA) http://www.brother.ca/support (in Canada) or to locate a Brother Authorized Service Center, visit: http://www.brother-usa.com/service/ Replace PF Kit MP Replace PF Kit1 Replace PF Kit2 It is time to replace the paper feeding kit. Contact Brother Customer Service or a Brother Authorized Service Center to replace the paper feeding kit. To replace the paper feeding kit contact Brother Customer Service at: 1-877-BROTHER (1-877-276-8437) (in USA) http://www.brother.ca/support (in Canada) or to locate a Brother Authorized Service Center, visit: http://www.brother-usa.com/service/ Replace Toner 1 1 The Touchscreen indicates the toner cartridge color that you must replace. BK=Black, C=Cyan, M=Magenta, Y=Yellow Replace WT Box The toner cartridge is at the end of its life. The machine will stop all print operations. While memory is available, faxes will be stored in the memory. It is time to replace the waste toner box. Replace the toner cartridge for the color indicated on the Touchscreen (see Replacing the toner cartridges on page 81). Replace the waste toner box (see Replacing the waste toner box on page 101). Scan Unable Document is too long for 2-sided scanning. Press . Use the appropriate size of paper for 2-sided scanning (see Print media on page 215). The machine has a mechanical problem. Press and hold down to turn the machine off, and then turn it on again (see Transferring your faxes or Fax Journal report on page 120). B Self-Diagnostic The temperature of the fuser unit does not rise to a specified temperature within the specified time. The fuser unit is too hot. If the problem continues, contact Brother Customer Service. Press and hold down to turn the machine off, wait a few seconds, and then turn it on again. Leave the machine idle for 15 minutes with the power on. 117