Canon REALiS WUX6000 D Pro AV User Manual - Page 102

Customizing System Operation (System Settings) Assigning a Channel for Remote Control > [System settings] > [Remote control channel] HDMI Digital PC Component Analog PC LAN USB When using multiple projectors at the same time (maximum 4), you can assign a different channel to each remote control so that each operates independently. Selecting the Projector Channel Selecting a Channel on the Remote control You can change the channel on the remote control as follows. Ch1 Press and hold the OK button and [ ] button at the same time for 3 seconds. Ch2 Press and hold the OK button and [ ] button at the same time for 3 seconds. Ch3 Press and hold the OK button and [ ] button at the same time for 3 seconds. Ch4 Press and hold the OK button and [ ] button at the same time for 3 seconds. Independent Press and hold the OK button and button at the same time for 3 seconds. Ch1 Select the remote control Ch2 channel to use with this Ch3 projector. Ch4 Independent Remote controls set to any channel can be used. Press the OK button to accept your setting and then press the MENU button. • The factory default is [Independent] for both projector and remote control. • After changing the channel on the menu, be sure to change the channel of the remote control too. • If an optional wired remote control (RSRC05) is used, there is no need to set the remote control channel. 102