Canon REALiS WUX6000 D Pro AV User Manual - Page 170

Completing Projector Settings Initializing Network Settings > [Network settings] > [Detailed settings] > [Network setting initialization] You can initialize the projector network settings. Specifying PJLink Settings > [Network settings] > [PJLink] You can enable or disable the PJLink network function of the projector. When the function is turned on, control is possible via the LAN using commands that meet PJLink standards. When [Network setting initialization] is selected, the window shown below appears. Select [Yes] then press the OK button. • The following items are initialized. - Settings used for web login, such as the network setting screen, user name, password, and other settings - Network password setting - Network function - Network standby settings - Register network password - PJLink - DHCP - IP address - Subnet mask - Gateway address - E-mail sender address - E-mail recipient address - Projector name - Comments - AMX Device Discovery settings - Crestron RoomView settings Off Disables the PJLink function. On Enables the PJLink function. Press the OK button to accept your setting and then press the MENU button. • [On] is the factory default. • This projector conforms to Class 1 as defined in the PJLink standards of the JBMIA (Japan Business Machine and Information System Industries Association). This projector supports all commands that are defined by PJLink Class 1, and has been verified as conforming to the PJLink standard Class 1 definition. • For information about using PJLink, refer to "Setting PJLink [PJLink]" (P187). 170