Canon REALiS WUX6000 D Pro AV User Manual - Page 82

Setting Display Status (Input Settings) Specifying SplitScreen Display > [Input settings] > [Split screen] HDMI Digital PC Component Analog PC LAN USB You can project two input images side by side. (P67) Press the OK button to accept your setting and then press the MENU button. The image with control rights is labeled "1" or "2." • [Off] is the factory default. • If or is displayed in the center of the image area, switch control to the other side by pressing the [ ] / [ ] buttons on the remote control. • When you switch to split-screen display, the left and right signals and input status are shown in the input window. Network and USB input cannot be combined for split-screen display. Off On Settings Exit split-screen mode. Activate split-screen mode. Split Off screen On Exit split-screen mode. Activate split-screen mode. Control Left rights screen Give control rights to the left side. "1" is displayed on the left. Right screen Give control rights to the right side. "2" is displayed on the right. Swap Switch the sides that right- images are projected left on. Layout Mode 3-7 Use 30% of the screen width for the left side and 70% for the right. Mode 5-5 Divide the screen width evenly for the left and right side. Mode 7-3 Use 70% of the screen width for the left side and 30% for the right. 82