Canon REALiS WUX6000 D Pro AV User Manual - Page 75
Setting Display Status (Input Settings), Selecting the Aspect
View all Canon REALiS WUX6000 D Pro AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Operation Setting Functions from Menus Setting Display Status (Input Settings) Selecting the Aspect > [Input settings] > [Aspect] HDMI Digital PC Component Analog PC LAN USB You can select a projection mode corresponding to the aspect ratio of the image. (P52) • For LAN and USB input, [Auto] is selected automatically. • Different contents are displayed for different screen aspects or input signal types. • The ASPECT button on the remote control can also be used to select the [Aspect] settings. Auto 16:10 16:9 4:3 Zoom True size An image is projected at the aspect ratio of the input signal. Select this mode for normal image projection. The image is projected using an input signal aspect ratio of 16:10. • There may be some cases when this cannot be selected, depending on the input signal and/or resolution. The image is projected using an input signal aspect ratio of 16:9. Select this if an image of 16:9 aspect ratio cannot be correctly projected in [Auto] mode. The image is projected using an input signal aspect ratio of 4:3. Select this if an image of 4:3 aspect ratio cannot be correctly projected in [Auto] mode. This cuts the upper/lower or left/ right part of the screen according to the screen aspect and zooms in or out of the center of the image. Select this if a letter box is displayed (black lines at the top/ bottom of the screen) when watching video. • There may be some cases when this cannot be selected, depending on the input signal and/or resolution. The image is projected with the original resolution of the input signal. • There may be some cases when this cannot be selected, depending on the input signal and/or resolution. Press the OK button to accept your setting and then press the MENU button. 75