Canon REALiS WUX6000 D Pro AV User Manual - Page 22

Safety Instructions When handling the lamp, pay attention to the following points. • Be sure not to handle the lamp immediately after it has been used. Be sure to switch off the power and wait for approximately 1 hour for the lamp and the projector to cool down sufficiently. Failure to do so could result in a burn or personal injury due to heat from the lamp or projector. • When an instruction to replace the lamp has been displayed (LAMP Indicator Displays (P35)), the possibility of the lamp breaking will increase. Replace the lamp with a new one as soon as possible. • When disposing of a used mercury lamp, dispose of it in the same way as a fluorescent lamp and in accordance with the local regulations where you live. Precautions for the batteries of the remote control Pay attention to the following points regarding handling of batteries. Failing to do so could result in a fire or personal injury. • Do not heat, short circuit or disassemble the batteries, or place them in a fire. • Do not attempt to recharge the batteries that are included with the remote control. • Remove the batteries when they are flat or when the remote control will not be used for a long period of time. • When replacing the batteries, replace both at the same time. Also, do not use two batteries of a different type at the same time. • Insert the batteries with the + and - terminals in the correct directions. • If any liquid from inside the batteries leaks out and contacts your skin, be sure to wash the liquid off thoroughly. 22