Canon REALiS WUX6000 D Pro AV User Manual - Page 155
Set [Marker] to [On]., Select the position where the images overlap., Adjust, Color, blending
View all Canon REALiS WUX6000 D Pro AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
Installation and Maintenance Installation Installation-Related Menu Settings Here, you can use the following settings in the edge blending menu. Off Adjust Side Left, Width Right, Top, Start Bottom position Color Off blending Adjust adjustment Black level Off adjustment Adjust Marker Off On Reset Do not blend overlapping areas. Display the menu for blending overlapping areas. Specify the width between the start and end markers. Moves the start position marker. Do not adjust colors of blended images. Adjust the color of overlapping area. (P157) Do not adjust the black level. Adjust the black level of non-overlapping image areas. (P158) Hide the markers. Display markers showing the adjustable blending area, with a red line at the beginning and a green line at the end. Reset the marker settings. • If you have already completed edge blending settings, selecting [Adjust] will apply them. • To restore the default settings before adjustment, select [Reset]. 3 Set [Marker] to [On]. Marker lines are projected on the images. The red marker indicates the start position for adjustment, and the green marker, the end position. By default, the green and red markers are displayed in the same position, so only the red marker is visible. 4 Select the position where the images overlap. When you are adjusting the left image, this area is along the right edge of the image. In the edge blending window, select [Side] > [Right]. Left image Right image Overlapping area 155