Canon REALiS WUX6000 D Pro AV User Manual - Page 95

Adjusting Image Quality (Image Adjustment) Specifying the Lamp Mode > [Image adjustment] > [Lamp mode] HDMI Digital PC Component Analog PC LAN USB Reducing the lamp brightness reduces power consumption and cooling fan noise. Resetting Image Adjustment Settings > [Image adjustment] > [Reset] HDMI Digital PC Component Analog PC LAN USB You can reset the current image adjustment settings to the default settings. If reset is performed when user setting 1-5 is selected for [Image mode], the settings are returned to the settings that were saved in [User 1-5]. Operation Setting Functions from Menus Full power Power saver Projects images at full brightness. Reduces lamp brightness to save energy. Press the OK button to accept your setting and then press the MENU button. • The factory default is [Full power]. • The adjustment you have made is stored as adjusted values for the input signals and image mode of the current projection. Note Regarding [Full power] • The lamp mode will automatically switch from [Full power] to [Power saver] when the room temperature exceeds approximately 35°C (95°F). Similarly, the lamp mode will automatically switch from [Power saver] to [Full power] when the room temperature falls below approximately 32°C (90°F). However, even if the lamp mode switches to [Power saver] in this case, it will still be displayed as [Full power] in the menu. • There may be some inconsistency in the measurement of room temperature. OK Resets the image adjustment settings. Cancel Cancels resetting of the image adjustment settings. • Only the setting for the combination of input signal and image mode for the current projection is reset. 95