Canon REALiS WUX6000 D Pro AV User Manual - Page 167

Installation and Maintenance Connecting to a Network Registering a Network Password > [Network settings] > [Register network password] Register the projector network password. Completing Projector Settings Specifying Standby Power Consumption > [Network settings] > [Network standby settings] Specify network function operating status in standby mode as follows. When [Register network password] is selected, the window shown below appears. Enter a 4-digit password. Enter the password using the buttons on the remote control. Normal All network functions are available even in standby mode, including the web screen, control over the network, and PJLink. Lowpower All network functions are available even in standby mode. However, the projector may be less responsive than usual when some functions are initially used. Press the OK button to accept your setting and then press the MENU button. • If you forget the password, press [ ] [OK] [ ] [OK] [ ] [OK] to restore the factory default setting. • The factory default is Press the OK button to accept your setting and then press the MENU button. • [Low-power] is the factory default. • [Low-power] may delay access over the network for some functions. For faster access, select [Normal]. • Power consumption when [Network function (wired)] is [On] varies depending on whether [Network standby settings] is set to [Normal] or [Low-power]. 167