Canon REALiS WUX6000 D Pro AV User Manual - Page 68

Split-Screen Display 4 Use the [ ] / [ ] buttons to select [On], and then press the OK button. • A number is displayed in the center of one image area. When the image at left is selected, 1 is displayed on the left, and when the image at right is selected, 2 is displayed on the right. The image labeled with a number has "control rights," and the sound for that image will be played. This is also the image with control rights if you adjust [Image priority]. (P83) • These functions cannot be adjusted in this mode: sharpness (P87), dynamic gamma (P91), noise reduction (P90, P91), lamp control (P94), and motion blur reduction (P103). • Some functions are not available, such as [Image flip H/V] (P141), [Screen aspect] (P142), [Keystone] (P144), [Zoom] (P143), and [Logo capture] (P96). • Image mode colors differ somewhat from those in single-image mode. 5 If or is displayed in the center of the image area, you can switch control to the other side by pressing the [ ] / [ ] buttons on the remote control. (Example of display in split-screen mode.) 6 Press the INPUT button, and then press the [ ] / [ ] buttons on the remote control to select the input signal for the side with control rights. The [Input] menu is displayed. To determine which side currently has control rights, check whether 1 or 2 is shown in orange in the upper right of the menu. As for input signals, the source used for the side with control rights is labeled with a green circle, and the source used for other side is labeled with a white circle. For details on selecting input signals, refer to "Selecting an Input Signal" (P40). 68