Canon REALiS WUX6000 D Pro AV User Manual - Page 186

Completing Computer Settings SNMP Item Receive community Password Confirm password Explanation Select the SNMP function version. If OFF is selected, the SNMP function will be turned off and the other settings in this screen cannot be changed. Enter the community name which will receive projector information in 1-byte alphanumeric characters and symbols (1 - 15 characters). Enter the community settings password in 1-byte alphanumeric characters and symbols (8 - 15 characters). It can be set only when the SNMP version is V3. For confirmation, enter the same password as you entered in [Password]. Factory default setting OFF Setting Projector Information [Projector info.] From [Projector info.] in the settings screen, you can enter relevant comments such as projector names and locations where projectors are installed so that the information can be used to identify projectors when multiple projectors are installed on the network. For the setting procedure, refer to "Network Setting" (P179). Item Projector name Comment Explanation Enter the projector name in 1-byte alphanumeric characters and symbols (1 - 63 characters). Enter any relevant notes, such as where the projector is installed. Factory default setting Canon Projector001 Some characters such as # cannot be used for [Projector name] and [Comment]. 186