Canon REALiS WUX6000 D Pro AV User Manual - Page 196

Replacing the Air Filter Follow the procedure below when replacing the air filter. 1 Turn off the projector power and remove the power plug. 2 Hook your finger around the air filter frame handle on the side of the projector, and pull the air filter out to remove it. Air filter frame handle 3 Remove the filter from the air filter frame. First disengage the tab on the inside, then remove the entire air filter from the frame. Air filter Air filter 4 Install a new air filter into the frame. First insert the air filter tab into the groove on the handle side of the frame, then press the air filter into the frame. 5 Securely insert the frame holding the air filter, all the way into the projector. Air filter frame • Handle the air filter carefully. If damaged, the air filter will not work properly. • When the lamp is replaced, it is recommended that you also replace the air filter. • Contact the Canon Customer Support Center for further information. • Replacement air filter part no.: RS-FL01 • This can also be purchased from the Canon website. 196