Canon REALiS WUX6000 D Pro AV User Manual - Page 92

Adjusting Image Quality (Image Adjustment) Correcting Memory Color > [Image adjustment] > [Advanced adjustment] > [Mem. color correct] HDMI Digital PC Component Analog PC LAN USB Enhances skin tones, blue skies, and greens, so that these colors are more consistent with people's remembered impressions. Fine-Tuning Colors (6-axis Color Adjustment) > [Image adjustment] > [Advanced adjustment] > [6-axis color adjust] HDMI Digital PC Component Analog PC LAN USB You can make fine adjustments to the image colors with RGB (red, green, blue) and CMY (cyan, magenta, yellow). Flesh Sky Green Specifies the intensity of enhancement: [Off], [Weak], [Middle], or [Strong]. Set to [Off] to disable enhancement. Off Adjust Disables 6-axis color adjustment. If you select [Adjust], the previous setting of 6-axis color adjustment becomes active again. Enables 6-axis color adjustment. Press the OK button to accept your setting and then press the MENU button. • The factory default settings are as follows. - For HDMI (when [HDMI In] (P108) is [Computer]), Digital PC or Analog PC, USB, or LAN, the factory default is [Off] in image modes other than [VividPhoto]. In [VividPhoto] mode, the factory default is [Middle]. - For HDMI (when [HDMI In] (P108) is set to [Auto]) and Component, the default setting is [Weak], regardless of the image mode. • The adjustments you have made are stored as adjusted values for the input signals and image mode of the current projection. Reset Use the [ ] / [ ] buttons to select [ Hue], [ Saturation], or [* Brightness], then adjust them with the [ ] / [ ] buttons. When color adjustments are completed, press the OK button. Returns all adjustment values to zero. When you have completed the adjustment, press the OK button to accept your setting and then press the MENU button. 92