Canon REALiS WUX6000 D Pro AV User Manual - Page 115
Do Not Use in the Following Environments, Do Not Touch the Lens with Bare Hands
View all Canon REALiS WUX6000 D Pro AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Installation and Maintenance Installation Before Installation ■ Do Not Use in the Following Environments • Locations with excessive humidity, dust, oily smoke or tobacco smoke Optical parts such as lenses or mirrors may become cloudy, reducing image quality. • Near high-voltage power lines or sources of electrical power This may cause malfunction. • On soft surfaces such as carpets or cushioned mats Heat may build up inside the projector and damage it. • Locations with excessive temperature or humidity This may damage the projector. Acceptable ranges for operating and storage temperature and humidity are as follows. Operating temperature Operating humidity Storage temperature 0°C (32°F) - 40°C (104°F) Up to 85% -10°C (14°F) - 60°C (140°F) ■ Do Not Touch the Lens with Bare Hands Do not touch the lens with bare hands. Doing so may adversely affect picture quality. ■ Install at a Sufficient Distance from Walls and Other Obstructions If the air intake or exhaust vent is blocked, heat will accumulate inside the projector, possibly resulting in a shortened projector lifetime or a malfunction. Do not install in a closet, on a bookshelf, or in other narrow spaces with poor ventilation. Install in a wellventilated location. (Ensure a minimum clearance of 50 cm (1.6 ft.) above, on both sides, and behind the projector.) Air intake vent Warmed airflow Exhaust vent 50 cm (1.6') 50 cm 50 cm 50 cm 115