Canon VB-R12VE Camera Management Tool User Manual - Page 45
Export item, Description, Remarks
View all Canon VB-R12VE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Export item Item Description Remarks uuid Group Unique identifier of the camera Group name The content entered in the camera list of this tool. 3 CameraName Camera name Within 15 characters Camera Specification File Use Status Connection status of the camera 0: Not connectable 1: Connectable 2: Authentication required 3: Connectable (error) 4: Admin Required SettingStatus Last performed operation IPv4Address IPv4 address AutoIP IPv4 address (AutoIP) IPv6Address IPv6 address Link local address only (An address that was set manually or set automatically using RA or DHCPv6 is not exported.) Model Model name of the camera FirmVer Firmware version Serial Serial number MACAddress MAC address Described in uppercase. Word Administrator password for the camera This is blank if [Save password.] was not selected in the [Export Camera List] dialog box at the time of saving or passwords were not entered individually for the cameras. If you select [Save password.] but do not select [Encrypt password.], the password is outputted without being encrypted. If you select both [Save password.] and [Encrypt password.], the password is encrypted when outputted. Port HTTP/HTTPS port for the The HTTP port number if [SSL] is set to "0: Disabled". The HTTPS camera port number if [SSL] is set to "1: Enabled". Whether SSL SSL communication 0: Disabled 1: Enabled Notes Remarks The content entered in the camera list of this tool. BuildNo Build number Bkup Save location for the settings backup file Blank when the save location of the backup file specified in the [Environmental Settings] dialog box is the same. HWID Hardware ID SubnetMask Subnet mask (IPv4) DefaultGateway Default gateway address (IPv4) FirmPath The firmware file path RestoreDefault Restores the default settings when the firmware is upgraded. 0: Do not restore 1: Restore Sets whether or not to restore the camera to the default settings when updating the firmware. User Administrator name Blank if an administrator name is not set for each camera and common authentication information is used. DHCP Whether DHCP (IPv4) is enabled 0: Disabled 1: Enabled 45