Canon XA50 XA50 XA55 Instruction Manual - Page 105
External Connections, Video Output Configuration, Video Output Configuration (Recording
View all Canon XA50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
6 External Connections Video Output Configuration The video signal output from the SDI OUT terminal (u only) and HDMI™ OUT terminal depends on the clip's video configuration and on various menu settings. The video signal output from the HDMI OUT terminal can also change depending on the capabilities of the connected monitor. u The camcorder cannot output signals to the SDI OUT terminal and HDMI OUT terminal simultaneously. Operating modes: 105 Video Output Configuration (Recording) Recording video configuration Resolution Frame rate Scan mode1 P 3840x2160 29.97P 23.98P PsF Maximum output resolution2 1920x1080 1280x720 (59.94P) - 1920x1080 P 59.94P 1280x720 (59.94P) PsF - 1920x1080 1920x1080 P 29.97P 23.98P 1280x720 (59.94P) PsF - 1920x1080 59.94i4 - 1280x720 (59.94P) 1280x7205 59.94P - - Resolution 1920x1080 1280x720 1920x1080 1920x1080 720x4803 1280x720 1920x1080 1920x1080 1280x720 1920x1080 1920x1080 1280x720 1280x720 Video output configuration Frame rate Same as the recording Color sampling 59.94P HDMI output: 59.94i u SDI output: 29.97PsF/59.94i YCbCr 4:2:2 8 bit 59.94P 59.94i Same as the recording 59.94P HDMI output: 59.94i u SDI output: 29.97PsF/59.94i 59.94i 59.94P 59.94P YCbCr 4:2:2 10 bit 1 > [£ Display Setup] > [SDI/HDMI Scan Mode] (u) or [HDMI Scan Mode] (v). 2 HDMI output: > [£ Display Setup] > [HDMI Max Resolution], u SDI output: > [£ Display Setup] > [SDI Output]. 3 HDMI output only. The output signal will change automatically depending on the capabilities of the external monitor. 4 XF-AVC clips only. 5 MP4 clips only.