Canon XA50 XA50 XA55 Instruction Manual - Page 61
Powered IS Button] setting., areas may appear when compensating for a high degree of camcorder shake.
View all Canon XA50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Image Stabilization NOTES • If the degree of camcorder shake is too high, the image stabilizer may not be able to compensate fully. • Powered IS is available even when [Image Stabilizer] is set to [® Off]. • You can change the operation of the POWERED IS button (long press or toggle on/off) with the [v Camera Setup] > [Powered IS Button] setting. > 61 • The angle of view will change when [Image Stabilizer] is set to an option other than [° Dynamic]. • When using Dynamic IS, the edges of the picture may be adversely affected (ghosting, artifacts and/or dark areas may appear) when compensating for a high degree of camcorder shake.
61
Image
S
tabilization
NOTES
NOTES
•
If the degree of camcorder shake is too high, the image stabilizer may not be able to compensate fully.
•
Powered IS is available even when [Image Stabilizer] is set to [
®
Off].
•
You can change the operation of the POWERED IS button (long press or toggle on/off) with the
>
[
v
Camera Setup]
>
[Powered IS Button] setting.
•
The angle of view will change when [Image Stabilizer] is set to an option other than [
°
Dynamic].
•
When using Dynamic IS, the edges of the picture may be adversely affected (ghosting, artifacts and/or dark
areas may appear) when compensating for a high degree of camcorder shake.