Canon XA50 XA50 XA55 Instruction Manual - Page 83
Advanced Audio Input Settings, INPUT 1 Mic Trimming] or [INPUT 2 Mic Trimming]
View all Canon XA50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Recording Audio Audio peak limiter • If at least one of the channels is set to the INPUT terminals and manual audio level adjustment, you can activate the audio limiter to lessen audio distortions. When activated, the audio limiter will limit the amplitude of audio input signals when they start to distort. Use the Limiter] setting. > [¡ " Audio Setup] > [INPUT 1/2 83 Advanced Audio Input Settings Microphone Sensitivity (INPUT Terminals) When one of the audio channels is set to the INPUT terminals and the corresponding INPUT1 or INPUT2 switch is set to MIC or MIC+48V, you can select the external microphone's sensitivity. 1 Select the desired INPUT terminal's sensitivity. > [C ! Audio Setup] > [INPUT 1 Mic Trimming] or [INPUT 2 Mic Trimming] 2 Select the desired option and then select [X]. Microphone Attenuator (INPUT Terminals) When one of the audio channels is set to the INPUT terminals and the corresponding INPUT1 or INPUT2 switch is set to MIC or MIC+48V, you can activate the external microphone's attenuator (20 dB). 1 Select the desired INPUT terminal's attenuator. > [C ! Audio Setup] > [INPUT 1 Mic Att.] or [INPUT 2 Mic Att.] 2 Select [i On] and then select [X]. • å appears on the right of the screen. Microphone Sensitivity (Built-in Microphone) When one of the audio channels is set to the built-in microphone/MIC terminal and no external microphone is connected to the MIC terminal, you can increase the built-in microphone's sensitivity. 1 Select [Built-in Mic Sensitivity]. > [C " Audio Setup] > [Built-in Mic Sensitivity] 2 Select the desired option and then select [X]. Options [h Normal]: [ High]: For recording audio under usual conditions. For recording audio at a higher level (+6 db). Microphone Attenuator (Built-in Microphone) When one of the audio channels is set to the built-in microphone/MIC terminal and no external microphone is connected to the MIC terminal, you can activate the built-in microphone's attenuator (20 dB) to prevent audio distortions when the audio level is too high. 1 Select [Built-in Mic Att.]. > [C " Audio Setup] > [Built-in Mic Att.] 2 Select [i On] and then select [X]. • å appears on the right of the screen.