Canon XA50 XA50 XA55 Instruction Manual - Page 117

Menu Options Menu item [Auto Slow Shutter] [Flicker Reduction] [Conversion Lens] [Image Stabilizer] [Powered IS Button] [Set WB Priority] [Focus/Zoom Ring Operation] [Focus Ring Direction] [Focus Ring Response] [Zoom Ring Direction] [IR Light] [IR Rec Color] Setting options and additional information [i On], [j Off] The camcorder automatically uses slow shutter speeds to obtain brighter recordings in places with insufficient lighting. • When this setting is set to [i On], the fastest shutter speed used is: 1/30 (59.94P), 1/15 (29.97P) or 1/12 (23.98P). • Auto slow shutter can be activated only during mode, when the shooting mode is set to ' or when infrared recording is activated. • If a trailing afterimage appears, set the auto slow shutter to [j Off]. • Auto slow shutter is not available when the AGC limit is set. [j Off], [k Automatic] When this setting is set to [k Automatic], the camcorder will automatically detect and reduce flicker. • When recording under light sources such as fluorescent, mercury or halogen lamps, the screen may flicker depending on the shutter speed. You may be able to avoid flicker by setting the shutter speed mode to a value matching the frequency of the local electrical system: 1/100 for 50 Hz systems, 1/60 for 60 Hz systems. [¾ TL-U58], [¿ WA-U58], [j Off] When you attach to the camcorder the optional TL-U58 Tele-converter or WA-U58 Wide Attachment, set the appropriate conversion lens setting. The image stabilization method and minimum focusing distance will change according to the accessory used. The minimum focusing distance throughout the entire zoom range will be 130 cm (4 ft. 3 in.) for the tele-converter and about 60 cm (2 ft.) for the wide attachment. • The tele-converter increases the focal length of the lens by a factor of approx. 1.5. The wide attachment reduces the focal length of the lens by a factor of approx. 0.8. • The approximate focusing distance displayed on the screen will change depending on the setting. Select [j Off] when a conversion lens is not attached to the camcorder. • When a setting other than [j Off] is selected, [v Camera Setup] > [AF Mode] will not be available. [® Off], [¯ Standard], [° Dynamic] (A 60) [Î Press and Hold], [Ï Toggle On/Off] Determines the operation mode of the POWERED IS button (A 60). [Î Press and Hold]: Powered IS will be activated while you hold the button pressed down. [Ï Toggle On/Off]: Each press of the button will turn the Powered IS function on and off. [ Automatic], [¼ Daylight], [É Tungsten], [ Color Temperature], [ Set 1], [ Set 2] This setting is convenient when you need to use a particular white balance setting frequently. You can press an assignable button set to [Ä WB Priority] to switch between the current white balance and the white balance setting selected for [Set WB Priority]. [ Enable], [ Disable] Selects whether to enable or disable the focus/zoom ring's operation. [h Normal], [X Reverse] Changes the direction the focus/zoom ring needs to be turned when using it to adjust the focus (when the focus/zoom ring switch is set to FOCUS). [Z Fast], [[ Normal], [] Slow] Selects the sensitivity of the response when operating the focus/zoom ring to adjust the focus (when the focus/zoom ring switch is set to FOCUS). [h Normal], [X Reverse] Changes the direction the focus/zoom ring needs to be turned when using it to adjust the zoom (when the focus/zoom ring switch is set to ZOOM). [i On], [j Off] (A 88) [± White], [² Green] (A 88) 117