Cisco 4948 Installation Guide - Page 49
Installing the Chassis in the Rack, Installing the Rack-Mount Brackets
UPC - 746320908878
View all Cisco 4948 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Chapter 3 Installing the Switch Figure 3-1 Installing the Rack-Mount Brackets 2 1 2 1 1 2 Rack-Mounting the Chassis 207508 1 M4 screws (4 screws per bracket) 21 2 Rack-mount bracket Installing the Chassis in the Rack To install the chassis in the rack, follow these steps: Step 1 Have one person carefully lift and position the chassis in front of the rack. Step 2 Position the chassis in the rack until the rack-mount bracket ears are in contact with the rack. Tip Use a tape measure or a level to ensure that the chassis is installed level in the rack. Step 3 Step 4 Adjust the chassis up or down in the rack until two screw holes in each rack-mount bracket ear are aligned with corresponding mounting holes in the equipment rack post. Place a level on top of the chassis and verify that the chassis is not tilted in the equipment rack. While one person holds the chassis in place, secure the chassis to the rack with the four 10-32 x 3/4-inch or the four 12-24 x 3/4-inch Phillips-head machine screws (two on each side) that are supplied in the accessory kit. OL-21561-02 Catalyst 4948E and Catalyst 4948E-F Switch Installation Guide 3-7