Craftsman #10402 Operation Manual - Page 53
Other, Cutting, Workpieces
View all Craftsman #10402 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
MAKING OTHER CUTS See Figures 49 - 50. Variations from the basic cuts include cutting long workpieces and non-through cuts. When making one of the following cuts, follow the instructions that apply for the basic cut, depending on the position, shape, and size of the wood. Do not attempt these cuts until you are skilled with the basic cuts. CUTTING LONG WORKPIECES ,_, WARNING: Make sure the blade guard is lowered and is working properly to prevent possible injury. ,_, WARNING: Never put your hands within 3 in. of the blade when it is on. • Make sure the wood does not touch the blade before you turn on the saw with the switch on the arm. Let the blade build up to full speed before it contacts the wood. See Figure 49. • Place a support the same height as the saw table nearby for the cut work. • When the work is completed, press the switch off and remove the key. SUPPORTLONGWORKPIECES J 53 Fig. 49 CRRFTSMRN_RADIALSAW 315.220100