Craftsman #10402 Operation Manual - Page 54

See Assembly

Get Craftsman #10402 - Professional Laser 10 in. Radial Arm Saw 22010 PDF manuals and user guides View all Craftsman #10402 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 54 highlights

NON-THROUGH See Figure 50. CUTS ,_, WARNING: Unplug the saw while removing or replacing the blade guard, Turn on the saw with the switch on the arm to confirm the blade is not receiving power. • Remove the blade and blade guard (see Assembly section), • Place a support the same height as the saw table nearby for the cut work. Lower the blade with the elevating handwheel, • Make sure the wood is not touching the blade. Insert the key and turn on the saw, Let the blade build up to full speed before contacting the workpiece, ,_ WARNING: Always use pushblocks when making non-through rip cuts to avoid the risk of serious injury. Never feed wood with your hands. • When the work is completed, press the switch off and remove the key, NON-THROUGHCUT Fig. 50 CRRFTSMR_NRADIALSAW 315.220100 54

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
NON-THROUGH
CUTS
See Figure 50.
,_,
WARNING:
Unplug the saw while removing
or
replacing the blade guard, Turn on the saw with
the switch on the arm to confirm
the blade is not
receiving
power.
•
Remove
the blade and blade guard (see
Assembly
section),
•
Place a support the same height as the saw table
nearby for the cut work. Lower the blade with the
elevating
handwheel,
•
Make sure the wood is not touching
the blade.
Insert the key and turn on the saw, Let the blade
build up to full speed before contacting
the work-
piece,
,_
WARNING:
Always
use pushblocks
when
making non-through
rip cuts to avoid the risk of
serious injury.
Never feed wood with your hands.
•
When the work is completed,
press the switch off
and remove the key,
NON-THROUGHCUT
Fig. 50
CRRFTSMRN
_
RADIALSAW
315.220100
54