Craftsman #10402 Operation Manual - Page 57

GENERAL MAINTENANCE ,_ WARNING: When servicing, use only identical Craftsman replacement parts. Use of any other part may create a hazard or cause product damage. ,_ WARNmNG: To prevent accidental starting that could cause possible serious personal injury, turn off the saw with the switch on the arm, remove the switch key, and unplug the saw before working on the radial saw. [] Remove sawdust from the work area, inside the blade cover, frequently. [] Remove sawdust from and clean the blade guards MOTOR/ELECTRICAL [] Frequently vacuum or blow out any sawdust from the work areas. _I_ WARNING: Rfthe power cords are worn, cut, or damaged in any way, have them replaced immediately by a qualified service technician at a Sears store or repair center. Failure to do so could result in serious personal injury. WARNING: To avoid fire or electrocution, reassemble electric parts only with identical Craftsman replacement parts. Reassemble exactly as originally assembled. [] Clean plastic parts with a soft damp cloth. Do not use any strong solvents. WARNmNG: Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc. contact plastic parts. They contain chemicals that can damage, weaken or destroy plastic. [] Check teeth of anti-kickback pawls; sharpen with fib if needed. [] Regularly check all nuts, bolts, screws, and cables for tightness and condition. 57 CRRFT$_4nNRADIAL SAW315.220100