D-Link DES-3010F Reference Manual - Page 100
VLAN Commands, create vlan, delete vlan
View all D-Link DES-3010F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
DES-30XX Layer 2 Switch CLI Reference Manual 16 VLAN COMMANDS The VLAN commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command create vlan delete vlan config vlan show vlan Parameters {tag } {[add [tagged | untagged] | delete] } {} Each command is listed, in detail, in the following sections. create vlan Purpose Syntax Description Parameters Restrictions Used to create a VLAN on the Switch. create vlan {tag } This command allows the creation of a VLAN on the Switch. − The name of the VLAN to be created. tag − The VLAN ID of the VLAN to be created. Allowed values = 2-4094. VLAN 1 is reserved for the default vlan set originally on the Switch. Each VLAN name can be up to 32 characters. Only administrator-level users can issue this command. Example usage: To create a VLAN v1, tag 2: DES-3026:4#create vlan v1 tag 2 Command: create vlan v1 tag 2 Success. DES-3026:4# delete vlan Purpose Syntax Description Parameters Restrictions Example usage: Used to delete a previously configured VLAN on the Switch. delete vlan This command will delete a previously configured VLAN on the Switch. − The VLAN name of the VLAN to delete. Only administrator-level users can issue this command. 96