D-Link DES-3010F Reference Manual - Page 22
disable web
![]() |
View all D-Link DES-3010F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
DES-30XX Layer 2 Switch CLI Reference Manual To enable HTTP and configure port number: DES-3026:4#enable web 80 Command: enable web 80 Success. DES-3026:4# disable web Purpose Syntax Description Parameters Restrictions Used to disable the HTTP-based management software on the Switch. disable web This command disables the Web-based management software on the Switch. None. Only administrator-level users can issue this command. Example usage: To disable HTTP: DES-3026:4#disable web Command: disable web Success. DES-3026:4# save Purpose Syntax Description Parameters Restrictions Used to save changes in the Switch's configuration to non-volatile RAM. save This command is used to enter the current switch configuration into non-volatile RAM. The saved switch configuration will be loaded into the Switch's memory each time the Switch is restarted. None. Only administrator-level users can issue this command. Example usage: To save the Switch's current configuration to non-volatile RAM: DES-3026:4#save Command: save Saving all configurations to NV-RAM... Done. DES-3026:4# 18
![](/manual_guide/products/dlink-des3010f-reference-manual-19b7797/22.png)