D-Link DES-3010F Reference Manual - Page 139
config 802.1x init
![]() |
View all D-Link DES-3010F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
DES-30XX Layer 2 Switch CLI Reference Manual config 802.1x init mac_address - Specifies the MAC address of the client to be added. Restrictions Only administrator-level users can issue this command. Example usage: To initialize the authentication state machine of some or all: DES-3026:4# config 802.1x init port_based ports all Command: config 802.1x init port_based ports all Success. DES-3026:4# config 802.1x reauth Purpose Syntax Description Parameters Used to configure the 802.1x re-authentication feature of the Switch. config 802.1x reauth [port_based ports [ | all] | mac_based ports [ | all] {mac_address }] The config 802.1x reauth command is used to re-authenticate a previously authenticated device based on a port number. port_based - This instructs the Switch to re-authorize 802.1x function based only on the port number. Ports approved for re-authorization can then be specified. ports − Specifies a port or range of ports to be reauthorized. all − Specifies all of the ports on the Switch to be reauthorized. mac-based - This instructs the Switch to re-authorize 802.1x function based on a specific MAC address. Ports approved for re-authorization can then be specified. ports − Specifies a port or range of ports. all − Specifies all ports on the Switch. mac_address - Specifies the MAC address of the client to add. Restrictions Only administrator-level users can issue this command. Example usage: To configure 802.1x reauthentication for ports 1-18: DES-3026:4#config 802.1x reauth port_based ports 1-18 Command: config 802.1x reauth port_based ports 1-18 Success. DES-3026:4# 135
![](/manual_guide/products/dlink-des3010f-reference-manual-19b7797/139.png)