D-Link DES-3010F Reference Manual - Page 59
DES-30XX Layer 2 Switch CLI Reference Manual, download, configuration
View all D-Link DES-3010F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
DES-30XX Layer 2 Switch CLI Reference Manual When autoconfig is enabled and the Switch is rebooted, the normal login screen will appear for a few moments while the autoconfig request (i.e. download configuration) is initiated. The console will then display the configuration parameters as they are loaded from the configuration file specified in the DHCP or TFTP server. This is exactly the same as using a download configuration command. After the entire Switch configuration is loaded, the Switch will automatically "logout" the server. The configuration settings will be saved automatically and become the active configuration. Upon booting up the autoconfig process is initiated, the console screen will appear similar to the example below. The configuration settings will be loaded in normal order. Example usage: To enable autoconfiguration on the Switch: DES-3026:4#enable autoconfig Command: enable autoconfig Success. DES-3026:4# DES-3026 Fast Ethernet Switch Command Line Interface Firmware: Build 2.00.020 Copyright(C) 2004-2007 D-Link Corporation. All rights reserved. DES-3026:4#download configuration 10.41.44.44 c:\cfg\setting.txt Command: download configuration 10.41.44.44 c:\cfg\setting.txt Connecting to server Done. Download configuration Done. DES-3026:4# The very end of the autoconfig process including the logout appears like this: DES-3026:4# DES-3026:4# DES-3026:4 DES-3026:4# DES-3026:4# End of configuration file for DES-3026 DES-3026:4# DES-3026:4 55