D-Link DES-3010F Reference Manual - Page 35
create snmp community, Command: create snmp community dlink view ReadView read_write
View all D-Link DES-3010F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
DES-30XX Layer 2 Switch CLI Reference Manual create snmp community Purpose Used to create an SNMP community string to define the relationship between the SNMP manager and an agent. The community string acts like a password to permit access to the agent on the Switch. One or more of the following characteristics can be associated with the community string: An Access List of IP addresses of SNMP managers that are permitted to use the community string to gain access to the Switch's SNMP agent. An MIB view that defines the subset of all MIB objects that will be accessible to the SNMP community. Read/write or read-only level permission for the MIB objects accessible to the SNMP community. Syntax create snmp community view [read_only | read_write] Description The create snmp community command is used to create an SNMP community string and to assign access-limiting characteristics to this community string. Parameters − An alphanumeric string of up to 32 characters that is used to identify members of an SNMP community. This string is used like a password to give remote SNMP managers access to MIB objects in the Switch's SNMP agent. − An alphanumeric string of up to 32 characters that is used to identify the group of MIB objects that a remote SNMP manager is allowed to access on the Switch. read_only − Specifies that SNMP community members using the community string created with this command can only read the contents of the MIBs on the Switch. read_write − Specifies that SNMP community members using the community string created with this command can read from and write to the contents of the MIBs on the Switch. Restrictions Only administrator-level users can issue this command. Example usage: To create the SNMP community string "dlink:" DES-3026:4#create snmp community dlink view ReadView read_write Command: create snmp community dlink view ReadView read_write Success. DES-3026:4# delete snmp community Purpose Used to remove a specific SNMP community string from the Switch. Syntax delete snmp community Description The delete snmp community command is used to remove a i l d fi d SNMP it t i f th S it h 31