D-Link DES-3010F Reference Manual - Page 128
config port_security ports, show port_security, Lock Address Mode
View all D-Link DES-3010F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
DES-30XX Layer 2 Switch CLI Reference Manual config port_security ports DeleteOnReset - The locked addresses will not age out until the Switch has been reset. Restrictions Only administrator-level users can issue this command. Example usage: To configure the port security: DES-3026:4#config port_security ports 1-5 admin_state enable max_learning_addr 5 lock_address_mode DeleteOnReset Command: config port_security ports 1-5 admin_state enable max_learning_addr 5 lock_address_mode DeleteOnReset Success DES-3026:4# show port_security Purpose Used to display the current port security configuration. Syntax show port_security {ports } Description This command is used to display port security information of the Switch ports. The information displayed includes port security admin state, maximum number of learning address and lock mode. Parameters ports − Specifies a port or range of ports to be viewed. Restrictions None. Example usage: To display the port security configuration: DES-3026:4#show port_security ports 1-10 Command: show port_security ports 1-10 Port# ---1 2 3 4 5 6 7 8 9 10 Admin State ----------Disabled Disabled Disabled Disabled Disabled Disabled Enabled Disabled Disabled Disabled Max. Learning Addr 1 1 1 1 1 1 10 1 1 1 Lock Address Mode DeleteOnReset DeleteOnReset DeleteOnReset DeleteOnReset DeleteOnReset DeleteOnReset DeleteOnReset DeleteOnReset DeleteOnReset DeleteOnReset DES-3026:4# 124