D-Link DES-3010F Reference Manual - Page 93
config bandwidth_control, <value 64-1024000>] | tx_rate [no_limit | <value 64
![]() |
View all D-Link DES-3010F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
DES-30XX Layer 2 Switch CLI Reference Manual To show the scheduling mechanism: DES-3026:4#show scheduling_mechanism Command: show scheduling_mechanism Scheduling Mechanism : strict DES-3026:4# config bandwidth_control Purpose Used to configure bandwidth control on a by-port basis. Syntax config bandwidth_control [] {rx_rate [no_limit | ] | tx_rate [no_limit | ]} Description The config bandwidth_control command is used to configure bandwidth on a by-port basis. Parameters − Specifies a port or range of ports to be configured for bandwidth control. rx_rate − Specifies that one of the parameters below (no_limit or ) will be applied to the rate at which the above specified ports will be allowed to receive packets no_limit − Specifies that there will be no limit on the rate of packets received by the above specified ports. − Specifies the packet limit, in kbps, that the above ports will be allowed to receive. tx_rate − Specifies that one of the parameters below (no_limit or ) will be applied to the rate at which the above specified ports will be allowed to transmit packets. no_limit − Specifies that there will be no limit on the rate of packets transmitted by the above specified ports. − Specifies the packet limit, in kbps, that the above ports will be allowed to transmit. Restrictions Only administrator-level users can issue this command. Example usage: To configure bandwidth control: DES-3026:4#config bandwidth_control 1-10 rx_rate 100000 tx_rate 100000 Command: config bandwidth_control 1-10 rx_rate 100000 tx_rate 100000 Success. DES-3026:4# 89
![](/manual_guide/products/dlink-des3010f-reference-manual-19b7797/93.png)