D-Link DES-3010F Reference Manual - Page 165

config sim_group, config sim, DES-3026:4#config sim_group delete 1

Page 165 highlights

DES-30XX Layer 2 Switch CLI Reference Manual config sim_group delete - Use this parameter to delete a member switch of a SIM group. The member switch should be defined by it ID number. Restrictions Only administrator-level users can issue this command. Example usage: To add a member: DES-3026:4#config sim_group add 2 Command: config sim_group add 2 Please wait for ACK... SIM Config Success !!! Success. DES-3026:4# To delete a member: DES-3026:4#config sim_group delete 1 Command: config sim_group delete 1 Please wait for ACK... Success. DES-3026:4# config sim Purpose Syntax Description Parameters Used to configure role parameters for the SIM protocol on the Switch. config sim [[commander {group_name } | candidate] | dp_interval | hold_time ]] This command is used to configure parameters of switches of the SIM. commander - Use this parameter to configure the commander switch for the following parameters: group_name - Used to update the name of the group. Enter an alphanumeric string of up to 64 characters to rename the SIM group. dp_interval - The user may set the discovery protocol interval, in seconds that the Switch will send out discovery packets. Returning information to the commander switch will include information about other switches connected to it. (Ex. MS, CaS). The user may set the discovery protocol interval from 30 to 90 seconds. hold time - Using this parameter, the user may set the time, in seconds, the Switch will hold information sent to it from other switches, utilizing the discovery interval protocol. The user 161

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174

DES-30XX Layer 2 Switch CLI Reference Manual
161
config sim_group
delete <member_id 1-32>
- Use this parameter to delete a member
switch of a SIM group. The member switch should be defined by it ID
number.
Restrictions
Only administrator-level users can issue this command.
Example usage:
To add a member:
DES-3026:4#config sim_group add 2
Command: config sim_group add 2
Please wait for ACK...
SIM Config Success !!!
Success.
DES-3026:4#
To delete a member:
DES-3026:4#config sim_group delete 1
Command: config sim_group delete 1
Please wait for ACK...
Success.
DES-3026:4#
config sim
Purpose
Used to configure role parameters for the SIM protocol on the
Switch.
Syntax
config sim [[commander {group_name <groupname 64>} |
candidate] | dp_interval <30-90> | hold_time <sec 100-255>]]
Description
This command is used to configure parameters of switches of the
SIM.
Parameters
commander
– Use this parameter to configure the commander
switch for the following parameters:
group_name <groupname 64>
- Used to update the name of the
group. Enter an alphanumeric string of up to 64 characters to
rename the SIM group.
dp_interval <30-90>
– The user may set the discovery protocol
interval, in seconds that the Switch will send out discovery packets.
Returning information to the commander switch will include
information about other switches connected to it. (Ex. MS, CaS).
The user may set the discovery protocol interval from 30 to 90
seconds.
hold time <sec 100-255>
– Using this parameter, the user may set
the time, in seconds, the Switch will hold information sent to it from
other switches, utilizing the discovery interval protocol. The user