D-Link DES-3010F Reference Manual - Page 43
create snmp host, show snmp host
![]() |
View all D-Link DES-3010F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
DES-30XX Layer 2 Switch CLI Reference Manual create snmp host Restrictions Only administrator-level users can issue this command. Example usage: To create an SNMP host to receive SNMP messages: DES-3026:4#create snmp host 10.48.74.100 v3 auth_priv public Command: create snmp host 10.48.74.100 v3 auth_priv public Success. DES-3026:4# delete snmp host Purpose Used to remove a recipient of SNMP traps generated by the Switch's SNMP agent. Syntax delete snmp host Description The delete snmp host command deletes a recipient of SNMP traps generated by the Switch's SNMP agent. Parameters − The IP address of a remote SNMP manager that will receive SNMP traps generated by the Switch's SNMP agent. Restrictions Only administrator-level users can issue this command. Example usage: To delete an SNMP host entry: DES-3026:4#delete snmp host 10.48.74.100 Command: delete snmp host 10.48.74.100 Success. DES-3026:4# show snmp host Purpose Used to display the recipient of SNMP traps generated by the Switch's SNMP agent. Syntax show snmp host {} Description The show snmp host command is used to display the IP addresses and configuration information of remote SNMP managers that are designated as recipients of SNMP traps that are generated by the Switch's SNMP agent. 39
![](/manual_guide/products/dlink-des3010f-reference-manual-19b7797/43.png)