D-Link DES-3010F Reference Manual - Page 114
show igmp_snooping, Last Member Query Interval
![]() |
View all D-Link DES-3010F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
DES-30XX Layer 2 Switch CLI Reference Manual show igmp_snooping Purpose Used to show the current status of IGMP snooping on the Switch. Syntax show igmp_snooping {vlan } Description This command will display the current IGMP snooping configuration on the Switch. Parameters − The name of the VLAN for which to view the IGMP snooping configuration. Restrictions None. Example usage: To show igmp snooping: DES-3026:4#show igmp_snooping Command: show igmp_snooping IGMP Snooping Global State : Disabled Multicast router Only : Disabled VLAN Name Query Interval Max Response Time Robustness Value Last Member Query Interval Host Timeout Route Timeout Leave Timer Querier State Querier Router Behavior State Multicast fast leave : default : 125 : 10 : 2 : 1 : 260 : 260 : 2 : Disabled : Non-Querier : Disabled : Disabled Total Entries: 1 DES-3026:4# show igmp_snooping group Purpose Used to display the current IGMP snooping group configuration on the Switch. Syntax show igmp_snooping group {vlan } Description This command will display the current IGMP snooping group configuration on the Switch. Parameters − The name of the VLAN for which to view IGMP snooping group configuration information. Restrictions None. Example usage: To show igmp snooping group: 110
![](/manual_guide/products/dlink-des3010f-reference-manual-19b7797/114.png)