D-Link DES-3010F Reference Manual - Page 32
delete snmp user, show snmp user
![]() |
View all D-Link DES-3010F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
DES-30XX Layer 2 Switch CLI Reference Manual DES-3026:4#create snmp user dlink default encrypted by_password auth md5 auth_password priv none Command: create snmp user dlink default encrypted by_password auth md5 auth_password priv none Success. DES-3026:4# delete snmp user Purpose Used to remove an SNMP user from an SNMP group and also to delete the associated SNMP group. Syntax delete snmp user Description The delete snmp user command removes an SNMP user from its SNMP group and then deletes the associated SNMP group. Parameters − An alphanumeric string of up to 32 characters that identifies the SNMP user that will be deleted. Restrictions Only administrator-level users can issue this command. Example usage: To delete a previously entered SNMP user on the Switch: DES-3026:4#delete snmp user dlink Command: delete snmp user dlink Success. DES-3026:4# show snmp user Purpose Used to display information about each SNMP username in the SNMP group username table. Syntax show snmp user Description The show snmp user command displays information about each SNMP username in the SNMP group username table. Parameters None. Restrictions Only administrator-level users can issue this command. Example usage: To display the SNMP users currently configured on the Switch: 28
![](/manual_guide/products/dlink-des3010f-reference-manual-19b7797/32.png)