D-Link DES-3010F Reference Manual - Page 88
config scheduling, show scheduling, DES-3026:4# config scheduling 3 weight 15, Success., DES-3026:4
View all D-Link DES-3010F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
DES-30XX Layer 2 Switch CLI Reference Manual config scheduling priority classes of service are identified by number − from 0 to 3 − with class 3 being the highest priority. weight − Specifies the maximum number of packets the above specified priority class of service will be allowed to transmit before allowing the next lowest priority classes of service to transmit its packets. A value between 1 and 55 packets can be specified. The default value is per class is: Class Weight 0 1 1 2 2 4 3 8 Restrictions Only administrator-level users can issue this command. Example usage: To configure traffic scheduling: DES-3026:4# config scheduling 3 weight 15 Command: config scheduling 3 weight 15 Success. DES-3026:4# show scheduling Purpose Used to display the currently configured traffic scheduling on the Switch. Syntax show scheduling Description The show scheduling command displays the current configuration for the maximum number of packets (weight) value assigned to the four priority classes of service on the Switch. The Switch will empty the four hardware classes of service in order, from the highest priority (class 3) to the lowest priority (class 0). Parameters None. Restrictions None. Example usage: To display the current scheduling configuration: 84