D-Link DES-3010F Reference Manual - Page 61
Network Monitoring Commands, show packet ports
View all D-Link DES-3010F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
DES-30XX Layer 2 Switch CLI Reference Manual 9 NETWORK MONITORING COMMANDS The network monitoring commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command show packet ports show error ports show utilization clear counters clear log show log enable syslog disable syslog show syslog create syslog host config syslog delete syslog host show syslog host Parameters [cpu | ports {}] {ports } {index } {severity [informational | warning | all] | facility [local0 | local1 | local2 | local3 | local4 | local5 | local6 | local7] | udp_port | ipaddress state [enable | disable]} {host [all ]} {severity [informational | warning | all] | facility [local0 | local1 | local2 | local3 | local4 | local5 | local6 | local7] | udp_port | ipaddress | state [enable | disable]} [ | all] {} Each command is listed, in detail, in the following sections. show packet ports Purpose Used to display statistics about the packets sent and received by the Switch. Syntax show packet ports Description This command is used to display statistics about packets sent and received by ports specified in the port list. The results are separated into three tables, labeled A, B, and C in the window above. Table A is relevant to the size of the packets, Table B is relevant to the type of packets and Table C is relevant to the type of frame associated with these packets. Parameters − Specifies a port or range of ports to be displayed. Restrictions None. Example usage: To display the packets analysis for port 7: 57