D-Link DES-3010F Reference Manual - Page 132
enable 802.1x, DES-3026:4#enable 802.1x, Command: enable 802.1x, Success., DES-3026:4
View all D-Link DES-3010F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
DES-30XX Layer 2 Switch CLI Reference Manual Each command is listed, in detail, in the following sections. NOTE: The uplink module ports (DES-3010F/G ports 9-10, DES-3018 ports 17-18, DES-3026 ports 25-26) do not support the 802.1X function. enable 802.1x Purpose Used to enable the 802.1x server on the Switch. Syntax enable 802.1x Description The enable 802.1x command enables the 802.1x Port-based or MACbased Network Access control server application on the Switch. Parameters None. Restrictions Only administrator-level users can issue this command. Example usage: To enable 802.1x switch wide: DES-3026:4#enable 802.1x Command: enable 802.1x Success. DES-3026:4# disable 802.1x Purpose Used to disable the 802.1x server on the Switch. Syntax disable 802.1x Description The disable 802.1x command is used to disable the 802.1x Port-based or MAC-based Network Access control server application on the Switch. Parameters None. Restrictions Only administrator-level users can issue this command. Example usage: To disable 802.1x on the Switch: DES-3026:4#disable 802.1x Command: disable 802.1x Success. DES-3026:4# 128