D-Link DES-3010F Reference Manual - Page 76
show stp ports, DES-30XX Layer 2 Switch CLI Reference Manual, Status 2 : STP disabled
View all D-Link DES-3010F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
DES-30XX Layer 2 Switch CLI Reference Manual DES-3026:4#show stp Command: show stp Bridge Parameters Settings STP Status : Enabled Max Age : 20 Hello Time : 2 Forward Delay : 15 Priority : 32768 STP Version : STP compatible TX Hold Count : 3 Forwarding BPDU : Enabled Loop-back Prevent : Disabled LBD Recover Time :60 Bridge Current Status Designated Root Bridge : 00-00-51-43-70-00 Root Priority : 32768 Cost to Root : 200000 Root Port : 10 Last Topology Change : 53sec Topology Changes Count : 1 Protocol Specification : 3 Max Age : 20 Hello Time : 2 Forward Delay : 15 Hold Time : 3 CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh Status 2 : STP disabled DES-3026:4#show stp Command: show stp Bridge Parameters Settings STP Status : Disabled Max Age : 20 Hello Time : 2 Forward Delay : 15 Priority : 32768 STP Version : RSTP TX Hold Count : 3 Forwarding BPDU : Enabled Loop-back Prevent : Disabled LBD Recover Time :60 DES-3026:4# show stp ports Purpose Used to display the Switch's current per-port group STP configuration. Syntax show stp ports Description This command displays the Switch's current per-port group STP configuration. Parameters − Specifies a port or range of ports to be configured. Restrictions None. 72