D-Link DES-3526DC Product Manual - Page 114
CPU Interface Filtering Rule Configuration window for Packet Content Mask, Parameters
View all D-Link DES-3526DC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
xStack DES-3500 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual Figure 6- 80. CPU Interface Filtering Rule Configuration window for Packet Content Mask To set the rule for CPU Packet Content, adjust the following parameters and click Apply. Parameters Description Profile ID Mode Access ID Type Offset This is the identifier number for this profile set. Select Permit to specify that the packets that match the access profile are forwarded by the Switch, according to any additional rule added (see below). Select Deny to specify that packets that match the access profile are not forwarded by the Switch and will be filtered. Type in a unique identifier number for this access. This value can be set from 1 - 65535. Selected profile based on Ethernet (MAC Address), IP address or Packet Content. • Ethernet instructs the Switch to examine the layer 2 part of each packet header. • IP instructs the Switch to examine the IP address in each frame's header. • Packet Content Mask instructs the Switch to examine the packet header. This field will instruct the Switch to mask the packet header beginning with the offset value specified: • value (0-15) - Enter a value in hex form to mask the packet from the beginning of the packet to the 15th byte. • value (16-31) - Enter a value in hex form to mask the packet from byte 16 to byte 31. • value (32-47) - Enter a value in hex form to mask the packet from byte 32 to byte 47. • value (48-63) - Enter a value in hex form to mask the packet from byte 48 to byte 63. • value (64-79) - Enter a value in hex form to mask the packet from byte 64 to byte 79. 100