D-Link DES-3526DC Product Manual - Page 92

xStack DES-3500 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual SNTP Settings Time Setting To configure the time settings for the Switch, open the Configuration folder, then the SNTP folder and click on the Current Time Setting link, revealing the following window for the user to configure. Figure 6- 55. Current Time: Status window The following parameters can be set or are displayed: Parameter Description Current Time Time Source Current Time: Status Displays the time when the Switch was initially started for this session. Displays the time source for the system. Current Time: SNTP Settings SNTP State Use this pull-down menu to Enabled or Disabled SNTP. SNTP Primary Server This is the IP address of the primary server the SNTP information will be taken from. SNTP Secondary Server This is the IP address of the secondary server the SNTP information will be taken from. SNTP Poll Interval in This is the interval, in seconds, between requests for updated SNTP information. Seconds Current Time: Set Current Time Year Enter the current year, if you want to update the system clock. Month Enter the current month, if you would like to update the system clock. Day Enter the current day, if you would like to update the system clock. Time in HH MM Enter the current time in hours and minutes, if you would like to update the system clock. Click Apply to implement your changes. 78