D-Link DES-3526DC Product Manual - Page 157
SNMP User Table Configuration window, Parameter, Description, User Name, Group Name
View all D-Link DES-3526DC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
xStack DES-3500 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual Figure 7- 30. SNMP User Table Configuration window The following parameters can set: Parameter Description User Name Group Name SNMP Version Auth-Protocol Priv-Protocol Encrypted Enter an alphanumeric string of up to 32 characters. This is used to identify the SNMP user. This name is used to specify the SNMP group created can request SNMP messages. V1 - Specifies that SNMP version 1 will be used. V2 - Specifies that SNMP version 2 will be used. V3 - Specifies that SNMP version 3 will be used. MD5 - Specifies that the HMAC-MD5-96 authentication level will be used. This field is only operable when V3 is selected in the SNMP Version field and the Encryption field has been checked. This field will require the user to enter a password. SHA - Specifies that the HMAC-SHA authentication protocol will be used. This field is only operable when V3 is selected in the SNMP Version field and the Encryption field has been checked. This field will require the user to enter a password. None - Specifies that no authorization protocol is in use. DES - Specifies that DES 56-bit encryption is in use, based on the CBC-DES (DES-56) standard. This field is only operable when V3 is selected in the SNMP Version field and the Encryption field has been checked. This field will require the user to enter a password between 8 and 16 alphanumeric characters. Checking the corresponding box will enable encryption for SNMP V3 and is only operable in SNMP V3 mode. To implement changes made, click Apply. To return to the SNMP User Table, click the Show All SNMP User Table Entries link. 143