D-Link DES-3526DC Product Manual - Page 126
RADIUS Server, RADIUS Server Authentication Setting window
View all D-Link DES-3526DC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
Parameter Port MAC Address Auth State BackendState OpenDir PortStatus xStack DES-3500 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual Description The port number of the reauthenticated port. Displays the physical address of the Switch where the port resides. The Authenticator State will display one of the following: Initialize, Disconnected, Connecting, Authenticating, Authenticated, Aborting, Held, ForceAuth, ForceUnauth, and N/A. The Backend State will display one of the following: Request, Response, Success, Fail, Timeout, Idle, Initialize, and N/A. Operational Controlled Directions are both and in. The status of the controlled port can be Authorized, Unauthorized, or N/A. RADIUS Server The RADIUS feature of the Switch allows you to facilitate centralized user administration as well as providing protection against a sniffing, active hacker. The Web Manager offers three windows. Click Port Access Entity > RADIUS Server > Authentic RADIUS Server to open the RADIUS Server Authentication Setting window shown below: Figure 6- 95. RADIUS Server Authentication Setting window This window displays the following information: Parameter Description Succession Choose the desired RADIUS server to configure: First, Second or Third. RADIUS Server Set the RADIUS server IP. Authentic Port Set the RADIUS authentic server(s) UDP port. The default port is 1812. Accounting Port Set the RADIUS account server(s) UDP port. The default port is 1813. Key Set the key the same as that of the RADIUS server. Confirm Key Confirm the shared key is the same as that of the RADIUS server. Accounting Method This allows you to Add/Modify or Delete the RADIUS Server. 112