D-Link DES-3526DC Product Manual - Page 86
Port Bandwidth, Bandwidth Settings window, Parameter, Description, From/To, No Limit
View all D-Link DES-3526DC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
xStack DES-3500 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual Port Bandwidth The bandwidth control settings are used to place a ceiling on the transmitting and receiving data rates for any selected port. In the Configuration folder, click Port Bandwidth, to view the window shown below. Figure 6- 47. Bandwidth Settings window The following parameters can be set or are displayed: Parameter Description From/To Type No Limit Rate A consecutive group of ports may be configured starting with the selected port. This drop-down menu allows you to select between RX (receive), TX (transmit), and Both. This setting will determine whether the bandwidth ceiling is applied to receiving, transmitting, or both receiving and transmitting packets. This drop-down menu allows you to specify that the selected port will have no bandwidth limit. Enabled disables the limit. This field allows you to enter the data rate, in Mbit/s, that will be the limit for the selected port. Click Apply to set the bandwidth control for the selected ports. Results of configured Bandwidth Settings will be displayed in the Port Bandwidth Table. 72