D-Link DES-3526DC Product Manual - Page 137
DHCP/BOOTP Relay Interface Settings
View all D-Link DES-3526DC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
xStack DES-3500 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual DHCP/BOOTP Relay Interface Settings The DHCP/ BOOTP Relay Interface Settings allow the user to set up a server, by IP address, for relaying DHCP/ BOOTP information to the Switch. The user may enter a previously configured IP interface on the Switch that will be connected directly to the DHCP/BOOTP server using the following window. Properly configured settings will be displayed in the BOOTP Relay Table at the bottom of the following window, once the user clicks the Add button under the Apply heading. The user may add up to four server IPs per IP interface on the Switch. Entries may be deleted by clicking it's corresponding . To enable and configure DHCP/BOOTP Relay Global Settings on the Switch, click Configuration > Layer 3 Networking > DHCP/BOOTP Relay > DHCP/BOOTP Relay Interface Settings: Figure 6- 109. DHCP/BOOTP Relay Interface Settings and DHCP/BOOTP Relay Interface Table window The following parameters may be configured or viewed. Parameter Description Interface Server IP The IP interface on the Switch that will be connected directly to the Server. Enter the IP address of the DHCP/BOOTP server. Up to four server IPs can be configured per IP Interface 123